1. 两ISDN adapter, 每个adapter有两B-channel,用dial-up networking连RAS server, RAS server也有两ISDN adaptic, 每个B-channel有自己的phone number.如何config multilink来使用所有4 个channel.

    A. create a PhoneBook Entry for each ISDN B-channel connect to RAS server by using all four entries.

    B. create one phonebook that has the four phone number. connect to the RAS server by using this entries.

    C. create one PhoneBook Entry for each ISDN adaptic connect to RAS server by using both entries.

    D. create one PhoneBook Entry that is configed to use multiple lines, Assign a phone number for each line.connect to RAS server by using this entry.

    答案：D

    2. 用dialup networking 连NT WS 到PPP server, ISP 要求备份logon to a server 并select a menu option that actives PPP support on the server. 如何配置NT WS , 自动active the ISP的PPP support?

    A. create a script, config DUN to run script after dialing.

    B. config DUN to open a terminal Windows after dialing.

    C. config DUN to open a terminal Windows before dialing.

    D. NT WS 4.0 不支持.

    答案：B

    3. NT WS map a network drive 到NT server (sales)的report 文件夹, sales通过internet 互联, sales.datum.com

    A. sales.datum.com\reports

    B. \\sales.datum.com\reports.

    C. ftp.sales.datum.com/reports

    D. www.sales.datum.com/reports

    答案：B

    4. NT WS 3.51升级到4.0 在单HPFS下.

    A. convert to NTFS, 升级

    B. convert to FAT.

    C. 升级再convert to NTFS

    D. 升级不动HPFS.

    答案：A

    5. Multilink enabled for 3 modems in NT WS, RAS server用call back,有何影响.

    A. RAS的server can call back all 3 modems.

    B. NT WS 自动联3个modem after call back.

    C. use a separate phonebook entry for each modem.

    D. 不能用multilink.

    答案：D

    6. 安NT WS 无网卡, 但需配置协议.

    A. select MS loopback adpatic, binding 协议到网卡.

    C. select generic NE 2000, ignore any error.

    答案：C

    7. 装了不对的网卡 driver, 出现blank blue screen without text.

    A. Restore registry using ER disk.

    B. using last known good.

    答案：B
    8. NT WS 4.0做NT WS 3.51, Win95, WS 4.0的print server , driver要在何处?

    答案：所有都在NT WS 4.0 Print server 上.

    9. 域中只有一PDC 是server, 用户workstation logon dialogbox不能有shutdown button, 如何做最省事.

    答案： 在PDC上, 建一个system policy并存于netlogon shared folder上.

    10. Admin 组中仅有一Admin, 从backup 中恢复Registry, 没有restore一个已知的password, 再用Emergercy Repair disk恢复security database.

    答案： 所有passwords accounts and policies revert to the way they are Stored on the Emergercy Repair disk.

   11. 三个modem , RAS server call back.

    答案：无法用Multilink protocol with this server.

    12. 三个16位应用程序, 在shared memory 中互相通信, 一个坏了影响所有16位App , 想让这三个依然共享内存通信, 但不影响其它:

    答案：这三个App 在default memory space中, 其它在separate memory中.

    13. 使NT WS 的用户使用Event viewer查看security log,

    答案：使他成为NT WS local Admin 中一员.

    14. 无法启动, system file可能坏了或是 boot sector

    答案： Setup boot disk重启, NT WS installation. Select ER process.

    15. 一周前为Everyone 组在NT WS 上的 printer设置了success和failure print Auditing , 自此后打印了300 documents. 但均未在Evernt View auditig.log中list.

    答案：应在 user manager 中enable: file and object access.

    16. search Registry 中key data string:

    答案：Regedit.exe

    17. NT WS 运行慢, excessive paging:

    答案：装多RAM .

    18. Monitor processor utilization on NT WS:

    答案：Performance Moniter, Task Manager.

    19. 多加一个App path to user’s envirment.

    答案：Add new path to user’s environment variables.

    20. Automate the installation of applications on the computers during the installation of NT WS.

    答案：用sysdiff

    21. 3.51升级4.0 , 33MHZ386, 16MRAM

    答案：不能升级.

    22. Schedule service中处理的最小unit:　

    答案：thread.

    23. install UPS:

    答案：(1) 用serial cable 连接.

    (2) 在control panel/UPS中diallog中设定.

    24. RAS 通入3秒后断开,

    答案：在Advance Connection Settings 中选 Read a log file.

    25. 提高Accounting App的priority, 并不与operating system service冲突:

    /high /realtime /normal /low

    答案：/high

    26. NT/DOS double 启动, 所有分区FAT, 要remove NT , only use DOS

    答案：Run sys.com Delete NT files

    27. 安装NT WS 中加入一个域:

    答案：specify the domain name, 提供域Administrator的口令.

    28. 已有3.51 Server , 再装 4.0 WS 后, 自动启动3.51.

    答案：1. install NT WS in its own directory.

    2. install后, 在boot.ini中set 3.51 as default.

    29. MS-DOS based 要装NT WS 从CD-ROM, 可从DOS中Access CO-ROM, 但不能被 NT WS 支持.

    答案：in DOS run winnt.exe on CD-ROM

    30. NT WS 从域1迁移到域2:

    答案：Network / Identfication/chang button.

    31. 缺省情况下, 16位-MS Windows Application 在NT中运行于:

    答案：single vitual DOS machine.